Desoldering Suction Pump
Desoldering Suction Pump
*100% brand new and high quality
*Color: Blue Black (As Pictures Show)
*Material: Plastic handle + stainless steel tube
*Optional types: US(110V), EU(220V)
How to Use:
1, 110V / 220V, POWER 30W
2, Turn on the power and preheat for 3-5 minutes
3, Push down the piston handle and clamp it. Align the front end of the solder iron nozzle with the solder joint of the component to be removed. When the solder melts, press the control button, and the solder will be sucked into the air cylinder
4, Two nozzles with different diameters are equipped for the tin aspirator, which can be selected according to the thickness of component lead
5, When welding, the same operation as using electric soldering iron
6, When disassembling the air cylinder, press down the upper end of the air cylinder in the direction of the mark, pull the air cylinder and the handle apart at the same time, and the air cylinder can be separated. When disassembling the suction nozzle, turn the suction nozzle anticlockwise to remove the suction nozzle
1, Check whether the use voltage is consistent, too high or too low voltage is not conducive to use
2, Before use, tighten the nozzle and air cylinder to prevent air leakage, otherwise the effect of tin absorption will be affected
3, Frequently remove the solder impurities entering the nozzle and air cylinder, and add a little oil to the piston
4, After each use, push the piston 3-4 times to remove the residual solder in the suction pipe, so that the suction nozzle and the suction pipe are unblocked for the next use
5, It is forbidden to install and remove the electric heating parts of the tin aspirator after it is powered on
6, When the new tin aspirator is used for the first time, it may smoke slightly due to the heating of the electric heating element, which is a normal phenomenon and will disappear naturally in ten minutes
7, In the process of use, a soldering iron base with natural heat dissipation structure must be used and placed in the soldering iron base
8, If the power cord is damaged, it must be replaced by the manufacturer or its maintenance department or similar full-time personnel to avoid danger
9, This product has ground wire. It should be equipped with socket with contact. Please pay attention to the use to ensure safety
1*Soldering Suction Pump
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
We do our best to source the most unique and innovative products we can find, and to make sure that you, our customer, always has the best possible experience when shopping with us.
If for some reason you don’t have a positive experience with us, please let us know and we’ll do whatever we can to make sure you are 100% satisfied with your purchase.
Shopping online can be intimidating, but we’re here to make things easy.
AN AMAZING CAUSE
We’re thrilled to support First Book – an amazing charity that donates books to disadvantaged children who need them the most.
You can find and purchase more useful products, like this, in here
Soldering Suction Pump
desoldering suction pump